Show simple item record

dc.contributor.authorMd Salleh, Mohd Fahmi
dc.contributor.authorGholami, Ahmadali
dc.contributor.authorWahid, Mazlan A.
dc.date.accessioned2019-03-17T11:04:07Z
dc.date.available2019-03-17T11:04:07Z
dc.date.copyright12/13/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0022-1481
dc.identifier.otherht_141_02_021801.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256608
dc.description.abstractVortex generator as secondary flow enhancement technique has captured the attention of many researchers recently to augment the performance of the fin-and-tube heat exchanger (FTHE). There are various vortex generator parameters that influence the thermal and hydraulic performance in the FTHE such as the geometry and arrangement. In this study, the effect of different vortex generator geometries and arrangements was investigated using numerical simulation method. There are three vortex generator geometries studied including rectangular winglet (RWVG), delta winglet (DWVG), and trapezoidal winglet (TWVG). The vortex generators were placed behind tubes either in common flow down (CFD) or common flow up (CFU) arrangement. The introduction of vortex generators behind tubes resulted in heat transfer augmentation but comes together with higher pressure drop penalty. Further analysis on the thermal performance has found that TWVG in CFU arrangement almost obtained similar thermal performance factor with respect to the baseline case at Reynolds number 500 and 600. However, the thermal performance factor for TWVG in CFU arrangement decreases as the Reynolds number further increased. For other vortex generator cases, lesser thermal performance factor was found as compared to the baseline case.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Evaluation of Thermal Hydraulic Performance in Fin-and-Tube Heat Exchangers With Various Vortex Generator Geometries Arranged in Common-Flow-Down or Common-Flow-Up
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4041832
dc.journal.fristpage21801
dc.journal.lastpage021801-13
dc.treeJournal of Heat Transfer:;2019:;volume( 141 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record