Show simple item record

dc.contributor.authorGarg, Deepak
dc.contributor.authorDhir, V. K.
dc.date.accessioned2019-03-17T10:56:08Z
dc.date.available2019-03-17T10:56:08Z
dc.date.copyright11/21/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0022-1481
dc.identifier.otherht_141_01_011504.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256429
dc.description.abstractIn the present study, level set method is used to simulate the entire boiling curve in a temperature-controlled mode spanning all the three regimes viz., nucleate, transition, and film boiling with a unified numerical model supplemented with correlations specifying nucleation site density and waiting time between successive nucleations. In order to improve the performance of the code, parallel computing has also been implemented. Vapor evolution process along with temporal- and spatial-averaged wall heat flux and wall void fraction are computed for a uniform wall superheat case. Wall void fraction is found to increase with increase in wall superheat nonlinearly as different regimes of boiling were traversed. Energy partitioning from wall into liquid, interface, and microlayer has also been examined where it is found that as the wall void fraction increases, the percent energy going into liquid decreases while the microlayer contribution peaks around critical heat flux (CHF). Numerical simulations are carried out in 3D with water as test liquid and contact angle of 38 deg.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Unified Three-Dimensional Numerical Model for Boiling Curve in a Temperature Controlled Mode1
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4041798
dc.journal.fristpage11504
dc.journal.lastpage011504-13
dc.treeJournal of Heat Transfer:;2019:;volume( 141 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record