Show simple item record

dc.contributor.authorRaviteja, S.
dc.contributor.authorRamakrishna, P. A.
dc.contributor.authorRamesh, A.
dc.date.accessioned2019-03-17T10:55:41Z
dc.date.available2019-03-17T10:55:41Z
dc.date.copyright11/19/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_04_042202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256410
dc.description.abstractNitromethane is extensively used in drag races and in glow plug unmanned aerial vehicle (UAV) engines. However, it has not been analyzed in the combustion literature enough. Nitromethane has a low stoichiometric air–fuel ratio; it can be blended with gasoline and used in larger quantities to enhance the power output of the internal combustion (IC) engines. This could find potential use in burgeoning UAV industry. The present investigation aims at experimentally determining the laminar burning speeds of nitromethane—gasoline blends at different equivalence ratios. Tests were conducted at both ambient conditions and at elevated temperatures and pressures. A constant volume combustion chamber (CVCC) was constructed and instrumented to carry out the investigation. The pressure rise in the chamber due to combustion was acquired and analyzed to determine the laminar burning speeds. The results showed that with an increase in the nitromethane concentration in gasoline, the laminar burning speeds for all the initial conditions also increased. With the rise in initial temperatures, the laminar burning speeds were observed to increase. However, a drop was observed with a rise in the initial pressures for all the blends. The obtained results for pure gasoline were compared with existing literature. A good match was observed. The investigation also aims at providing vital experimental data, which can be used for computational fluid dynamics validation studies later.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLaminar Burning Speeds of Nitromethane-Gasoline Blends at Elevated Temperatures and Pressures
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4041725
dc.journal.fristpage42202
dc.journal.lastpage042202-7
dc.treeJournal of Energy Resources Technology:;2019:;volume( 141 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record