Show simple item record

dc.contributor.authorZhang, Mo
dc.contributor.authorDabirian, Ramin
dc.contributor.authorMohan, Ram S.
dc.contributor.authorShoham, Ovadia
dc.date.accessioned2019-03-17T10:37:23Z
dc.date.available2019-03-17T10:37:23Z
dc.date.copyright10/24/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_03_032905.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256231
dc.description.abstractOil–water dispersed flow occurs commonly in the petroleum industry during the production and transportation of crudes. Phase inversion occurs when the dispersed phase grows into the continuous phase and the continuous phase becomes the dispersed phase caused by changes in the composition, interfacial properties, and other factors. Production equipment, such as pumps and chokes, generates shear in oil–water mixture flow, which has a strong effect on phase inversion phenomena. The objective of this paper is to investigate the effects of shear intensity and water cut (WC) on the phase inversion region and also the droplet size distribution. A state-of-the-art closed-loop two phase (oil–water) flow facility including a multipass gear pump and a differential dielectric sensor (DDS) is used to identify the phase inversion region. Also, the facility utilizes an in-line droplet size analyzer (a high speed camera), to record real-time videos of oil–water emulsion to determine the droplet size distribution. The experimental data for phase inversion confirm that as shear intensity increases, the phase inversion occurs at relatively higher dispersed phase fractions. Also the data show that oil-in-water emulsion requires larger dispersed phase volumetric fraction for phase inversion as compared with that of water-in-oil emulsion under the same shear intensity conditions. Experiments for droplet size distribution confirm that larger droplets are obtained for the water continuous phase, and increasing the dispersed phase volume fraction leads to the creation of larger droplets.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Shear and Water Cut on Phase Inversion and Droplet Size Distribution in Oil–Water Flow
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4041661
dc.journal.fristpage32905
dc.journal.lastpage032905-9
dc.treeJournal of Energy Resources Technology:;2019:;volume( 141 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record