Show simple item record

dc.contributor.authorChattopadhyay, Pritthi
dc.contributor.authorMondal, Sudeepta
dc.contributor.authorRay, Asok
dc.contributor.authorMukhopadhyay, Achintya
dc.date.accessioned2019-03-17T10:31:24Z
dc.date.available2019-03-17T10:31:24Z
dc.date.copyright9/7/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0022-0434
dc.identifier.otherds_141_01_014501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256168
dc.description.abstractA critical issue in design and operation of combustors in gas turbine engines is mitigation of thermoacoustic instabilities, because such instabilities may cause severe damage to the mechanical structure of the combustor. Hence, it is important to quantitatively assimilate the knowledge of the system conditions that would potentially lead to these instabilities. This technical brief proposes a dynamic data-driven technique for design of combustion systems by taking stability of pressure oscillations into consideration. Given appropriate experimental data at selected operating conditions, the proposed design methodology determines a mapping from a set of operating conditions to a set of quantified stability conditions for pressure oscillations. This mapping is then used as an extrapolation tool for predicting the system stability for other conditions for which experiments have not been conducted. Salient properties of the proposed design methodology are: (1) It is dynamic in the sense that no fixed model structure needs to be assumed, and a suboptimal model (under specified user-selected constraints) is identified for each operating condition. An information-theoretic measure is then used for performance comparison among different models of varying structures and/or parameters and (2) It quantifies a (statistical) confidence level in the estimate of system stability for an unobserved operating condition by using a Bayesian nonparametric technique. The proposed design methodology has been validated with experimental data of pressure time-series, acquired from a laboratory-scale lean-premixed swirl-stabilized combustor.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Data-Driven Combustor Design for Mitigation of Thermoacoustic Instabilities
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4040210
dc.journal.fristpage14501
dc.journal.lastpage014501-7
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2019:;volume( 141 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record