Show simple item record

dc.contributor.authorKarimshoushtari, Milad
dc.contributor.authorNovara, Carlo
dc.date.accessioned2019-03-17T10:13:52Z
dc.date.available2019-03-17T10:13:52Z
dc.date.copyright10/4/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0022-0434
dc.identifier.otherds_141_01_011016.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256008
dc.description.abstractLean NOx trap (LNT) is one of the most effective after-treatment technologies used to reduce NOx emissions of diesel engines. One relevant problem in this context is LNT regeneration timing control. This problem is indeed difficult due to the fact that LNTs are highly nonlinear systems, involving complex physical/chemical processes, that are hard to model. In this paper, a novel approach for regeneration timing of LNTs is proposed, allowing us to overcome these issues. This approach, named data-driven model predictive control (D2-MPC), does not require a physical model of the engine/trap system but is based on low-complexity polynomial prediction models, directly identified from data. The regeneration timing is computed through an optimization algorithm, which uses the identified models to predict the LNT behavior. Two D2-MPC strategies are proposed, and tested in a co-simulation study, where the plant is represented by a detailed LNT model, built using the well-known commercial tool AMEsim, and the controller is implemented in matlab/simulink.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Data-Driven Model Predictive Control Approach to Lean NOx Trap Regeneration
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4041354
dc.journal.fristpage11016
dc.journal.lastpage011016-9
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2019:;volume( 141 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record