Show simple item record

dc.contributor.authorKang, Pan-Sang
dc.contributor.authorHwang, Ji Yu
dc.contributor.authorLim, Jong-Se
dc.date.accessioned2019-03-17T10:13:51Z
dc.date.available2019-03-17T10:13:51Z
dc.date.copyright10/3/2018 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_03_032903.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256007
dc.description.abstractWax deposition is an extremely common occurrence affecting flow assurance in oil fields. Under the laminar flow condition, the effect of the flow rate on wax deposition is still unclear. In this study, a flow loop test was conducted by considering the depletion effect to investigate the flow effect on wax deposition in single-phase laminar flow. The measured data were compared with the estimated data using models (wax deposition, hydrodynamic, and heat transfer models). The data obtained from the models were matched with the measured data; thus, thereby model parameters were tuned and the wax deposit thickness along the pipeline was estimated with respect to flow rate. The study results indicate that the wax deposit thickness decreases when the flow rate increases at the thickest spot (TS). The volume of wax deposits increases when the flow rate increases. An increase in the flow rate increases the distance between the inlet and the location of the TS.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Rate Effect on Wax Deposition Behavior in Single-Phase Laminar Flow
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4041525
dc.journal.fristpage32903
dc.journal.lastpage032903-9
dc.treeJournal of Energy Resources Technology:;2019:;volume( 141 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record