Show simple item record

dc.contributor.authorPierce, James
dc.contributor.authorCrane, Nathan B.
dc.date.accessioned2019-03-17T10:11:10Z
dc.date.available2019-03-17T10:11:10Z
dc.date.copyright2/25/2019 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0022-1481
dc.identifier.otherht_141_04_042002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4255981
dc.description.abstractPulse thermography (PT) is a nondestructive testing method in which an energy pulse is applied to a surface while the surface temperature evolution is measured to detect sub surface defects and estimate their depth. This nondestructive test method was developed on the assumption of instantaneous surface heating, but recent work has shown that relatively long pulses can be used to accurately determine defect depth in polymers. This paper examines the impact of varying input pulse length on the accuracy of defect depth quantification as a function of the material properties. Simulations using both thermoplastics and metals show that measurement error is dependent on a nondimensionalized pulse length. The simulation results agree with experimental results for three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) components. Analysis and experiments show that defects can be accurately detected with minor modification to the standard methods as long as the pulse ends before the characteristic defect signal is detected.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImpact of Pulse Length on the Accuracy of Defect Depth Measurements in Pulse Thermography
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4042785
dc.journal.fristpage42002
dc.journal.lastpage042002-6
dc.treeJournal of Heat Transfer:;2019:;volume( 141 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record