Show simple item record

dc.contributor.authorS. C. Li; J. Wu; Z. H. Xu; W. M. Yang
dc.date.accessioned2019-03-10T12:08:26Z
dc.date.available2019-03-10T12:08:26Z
dc.date.issued2019
dc.identifier.other%28ASCE%29GM.1943-5622.0001387.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254965
dc.description.abstractIn order to investigate the impact of fault on the stability of the water-resisting layer of the coal floor, the critical water pressure formula of the water-resisting layer failure under the influence of fault is deduced respectively by using brittle fracture criterion in fracture mechanics and the shear failure limit equilibrium condition in rock mechanics. The corresponding mechanics criterion of water inrush from the coal floor is proposed. Then the critical water pressure affected by the width of the coal pillar, the thickness of water-resisting layer, the dip angle, and mechanical property of fault is analyzed and discussed. Finally, the validity of the proposed mechanics criterion of water inrush is verified by the example analysis of coal mine engineering. The results show that (1) the smaller the dip angle of fault, the less the critical the water pressure, and the floor is more prone to water inrush; (2) the critical water pressure is positively correlated to the cohesion of fault. The smaller the cohesion of fault, the greater the possibility of water inrush; (3) the bigger the coal pillar width, the larger the critical water pressure, and the floor is less prone to water inrush; and (4) the critical water pressure linearly increases with the thickness of the water-resisting layer. The larger the thickness of the water-resisting layer, the smaller the possibility of water inrush.
dc.publisherAmerican Society of Civil Engineers
dc.titleMechanics Criterion of Water Inrush from the Coal Floor under Influence of Fault and Its Engineering Application
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001387
dc.page04019022
dc.treeInternational Journal of Geomechanics:;2019:;Volume ( 019 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record