Show simple item record

dc.contributor.authorReza Ziaie Moayed; Massoud Hosseinali; Seyed Masoud Shirkhorshidi; Javad Sheibani
dc.date.accessioned2019-03-10T12:08:23Z
dc.date.available2019-03-10T12:08:23Z
dc.date.issued2019
dc.identifier.other%28ASCE%29GM.1943-5622.0001384.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254962
dc.description.abstractThe shear stress–displacement behavior and shear-strength parameters of the interface between the cement grout nail and surrounding soil are important factors in the design and safety assessment of a soil-nailing system. One of the most commonly used methods to measure the interface shear strength of a soil-grouting system is the direct shear testing method. This study aimed to investigate the behavior of the interface between the cement-grouted materials (soil nails) and sandy soil using direct shear test apparatus, make a comparison between the sand–sand interface and grout–sand interface, and calibrate an interface model to be used in simulations of soil-nailing systems. The effect of the water:cement ratio of the grout and the relative density of the sand on the interface behavior is also investigated. The findings show that, in general, the behavior of interfaces is similar to that of dense sand in terms of strain softening, and their peak and residual friction angles were found to be approximately 8 and 4% higher, respectively. The setting time of the grout and relative density of the sand were not found to affect friction angles significantly, whereas cohesion intercepts were affected by it. Finally, the model calibrated herein was found to have good agreement with experimental data and could be used for soil-nailing simulations.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation and Constitutive Modeling of Grout–Sand Interface
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001384
dc.page04019024
dc.treeInternational Journal of Geomechanics:;2019:;Volume ( 019 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record