Show simple item record

dc.contributor.authorR. Bärtsch
dc.date.accessioned2019-03-10T12:06:03Z
dc.date.available2019-03-10T12:06:03Z
dc.date.issued2019
dc.identifier.other%28ASCE%29EM.1943-7889.0001588.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254870
dc.description.abstractThis paper developed a nonlinear model for analysis of full-locked coil ropes under high external radial forces, in particular for prediction of deformations, stresses, and strains. This nonlinear model is based on homogenized layers and consists of the mathematical model in a generalized plane strain approach and the nonlinear model of orthotropic material properties. The material properties of each layer can be determined in the model in the radial and circumferential directions independently. The nonlinear characteristics of material properties have a significant effect on the mechanical behavior when multilayered wire strands are under high external pressure, e.g., as in the case of clenching. These nonlinearities considered in the model cover the contact mechanics of wires within and between layers, including geometrical and material nonlinearities for line and point contact as well as initial gaps between wires. The performance of the developed nonlinear model was presented and compared with experimental data and with a conventional linear approach. The predictions based on this nonlinear model matched the experimental data closely. The sensitivity of the results to geometrical tolerances was demonstrated. The results showed clearly that a linear approach is not appropriate for the investigated problem. The proposed nonlinear model is an accurate and effective method for calculation of the response of a rope under high external radial forces. It can be applied to any multilayered wire strand.
dc.publisherAmerican Society of Civil Engineers
dc.titleNonlinear Model for Full-Locked Coil Ropes Subjected to High External Radial Forces
dc.typeJournal Paper
dc.journal.volume145
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)EM.1943-7889.0001588
dc.page04019019
dc.treeJournal of Engineering Mechanics:;2019:;Volume ( 145 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record