Show simple item record

dc.contributor.authorRuizhe Si; Qingli Dai; Xiao Sun
dc.date.accessioned2019-03-10T12:05:35Z
dc.date.available2019-03-10T12:05:35Z
dc.date.issued2019
dc.identifier.other%28ASCE%29EM.1943-7889.0001561.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254843
dc.description.abstractThis study investigated the transport properties of cement mortar using microscale X-ray computed tomography (μCT) characterization techniques, the Permeability Solver computational program, and laboratory experiments. Lightweight aggregates (LWAs) were used as the internal curing agent in this study. Mortar samples with and without internal curing were prepared with a water-cement ratio of 0.45. The μCT techniques were applied to obtain digital data of the microstructure of the mortar samples at the resolution of 1 μm. The acquired images were processed to identify the pore structure. Three-dimensional (3D) digital pore structure samples were reconstructed, and the data were read by the Permeability Solver to analyze the porosity, pore conductivity, and permeability of the mortar mixtures. Pore connectivity was evaluated by the burning algorithm. Water transport was simulated by the finite-difference method combined with the compressibility relaxation algorithm. Darcy’s Law was then applied to calculate the permeability of the mixture. The transport properties of mortar with and without internal curing were simulated at 60 and 84 h. The results showed that the internally cured samples had lower permeability than the samples without internal curing. The permeability of the samples with internal curing decreased from 60 to 84 h. The results indicated that autogenous shrinkage cracks could be mitigated using internal curing.
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical and Experimental Study of Internal Curing Effects on Permeability of Mortar Samples
dc.typeJournal Paper
dc.journal.volume145
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)EM.1943-7889.0001561
dc.page04018132
dc.treeJournal of Engineering Mechanics:;2019:;Volume ( 145 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record