Show simple item record

dc.contributor.authorBo Hu; Tribikram Kundu
dc.date.accessioned2019-03-10T11:47:56Z
dc.date.available2019-03-10T11:47:56Z
dc.date.issued2019
dc.identifier.other%28ASCE%29ST.1943-541X.0002261.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254287
dc.description.abstractThe failure of beam–column joints in RC frame buildings induced by a strong earthquake can lead to the collapse of buildings. Therefore, numerous experimental studies have been carried out on beam–column joints made with natural aggregate concrete (NAC). However, only a few experimental tests have been conducted on recycled aggregate concrete (RAC) beam–column joints. This paper presents an experimental investigation of the seismic behavior of various types of RAC beam–column joints. A series of five RAC beam–column joint specimens, including three interior joints and two exterior joints, were tested under quasi-static cyclic loading and their behaviors were evaluated in terms of strength, stiffness, cumulative energy dissipation, damping ratio, and damage indexes at different load steps. The influence of joint type, column axial compression level, stirrup ratio in the joint panel, and longitudinal reinforcement ratio on the seismic performance of RAC joints was evaluated. The validity of RC joint shear strength models proposed by different building codes to predict RAC joint shear strength were examined by comparing the experimental shear strength values with analytical results.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Performance of Interior and Exterior Beam–Column Joints in Recycled Aggregate Concrete Frames
dc.typeJournal Paper
dc.journal.volume145
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002261
dc.page04018262
dc.treeJournal of Structural Engineering:;2019:;Volume ( 145 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record