Show simple item record

dc.contributor.authorHamel, J. M.
dc.contributor.authorAllphin, Devin
dc.contributor.authorElroy, Joshua
dc.date.accessioned2019-02-28T11:14:48Z
dc.date.available2019-02-28T11:14:48Z
dc.date.copyright3/29/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_07_072204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254251
dc.description.abstractA system-level computational model of a recently patented and prototyped novel steam engine technology was developed from first principles for the express purpose of performing design optimization studies for the engine's inventors. The developed system model consists of numerous submodels including a flow model of the intake process, a dynamic model of the intake valve response, a pressure model of the engine cylinder, a kinematic model of the engine piston, and an output model that determines engine performance parameters. A crank-angle discretization strategy was employed to capture the performance of engine throughout a full cycle of operation, thus requiring all engine design submodels to be evaluated at each crank angle of interest. To produce a system model with sufficient computational speed to be useful within optimization algorithms, which must exercise the system level model repeatedly, various simplifying assumptions and modeling approximations were utilized. The model was tested by performing a series of multi-objective design optimization case studies using the geometry and operating conditions of the prototype engine as a baseline. The results produced were determined to properly capture the fundamental behavior of the engine as observed in the operation of the prototype and demonstrated that the design of engine technology could be improved over the baseline using the developed computational model. Furthermore, the results of this study demonstrate the applicability of using a multi-objective optimization-driven approach to conduct conceptual design efforts for various engine system technologies.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMulti-Objective Optimization Model Development to Support Sizing Decisions for a Novel Reciprocating Steam Engine Technology
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue7
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4039611
dc.journal.fristpage72204
dc.journal.lastpage072204-10
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record