Show simple item record

dc.contributor.authorGao, Xiaoyan
dc.contributor.authorZhang, Yaning
dc.contributor.authorLi, Bingxi
dc.contributor.authorXie, Gongnan
dc.contributor.authorZhao, Wenke
dc.date.accessioned2019-02-28T11:14:45Z
dc.date.available2019-02-28T11:14:45Z
dc.date.copyright3/29/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_04_044501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254242
dc.description.abstractBiomass is a promising alternative energy source for fossil fuel with the advantages of abundance, renewability, environmental friendliness, etc. This makes the development of biomass technology be of great potential and interesting. The experiments of biomass fast pyrolysis were performed in a microquartz reactor for rice husk (RH), corn stalk (CS) and birch wood (BW), and scanning electron microscope (SEM), energy dispersive spectrometer, and Raman microscope were then applied to analyze the collected chars. The average char yields of RH, CS, and BW pyrolyzed at 800 °C were 29.64%, 18.67%, and 8.64%, respectively. The morphological structures of RH and CS were mainly reserved in chars, while the raw surface textures of BW disappeared during the fast pyrolysis. The silicon concentrations in RH char and CS char were much higher than BW char, and the graphitization degree of CS char was the lowest among the three biomass chars.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation Into the Characteristics of Chars Obtained From Fast Pyrolysis of Different Biomass Fuels
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4039603
dc.journal.fristpage44501
dc.journal.lastpage044501-5
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record