Show simple item record

dc.contributor.authorEmdadi, Arash
dc.contributor.authorZenouzi, Mansour
dc.contributor.authorLak, Amir
dc.contributor.authorPanahirad, Behzad
dc.contributor.authorEmami, Yunus
dc.contributor.authorLak, Farshad
dc.contributor.authorKowalski, Gregory J.
dc.date.accessioned2019-02-28T11:14:44Z
dc.date.available2019-02-28T11:14:44Z
dc.date.copyright2/15/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_07_072001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254237
dc.description.abstractMixing of fresh (river) water and salty water (seawater or saline brine) in a controlled environment produces an electrical energy known as salinity gradient energy (SGE). Two main conversion technologies of SGE are membrane-based processes: pressure retarded osmosis (PRO) and reverse electrodialysis (RED). Exergy calculations for a representative river-lake system are investigated using available data in the literature between 2000 and 2008 as a case study. An exergy analysis of an SGE system of sea-river is applied to calculate the maximum potential power for electricity generation. Seawater is taken as reference environment (global dead state) for calculating the exergy of fresh water since the sea is the final reservoir. Aqueous sodium chloride solution model is used to calculate the thermodynamic properties of seawater. This model does not consider seawater as an ideal solution and provides accurate thermodynamics properties of sodium chloride solution. The chemical exergy analysis considers sodium chloride (NaCl) as main salt in the water of this highly saline Lake with concentration of more than 200 g/L. The potential power of this system is between 150 and 329 MW depending on discharge of river and salinity gradient between the Lake and the River based on the exergy results. This result indicates a high potential for constructing power plant for SGE conversion. Semipermeable membranes with lifetime greater than 10 years and power density higher than 5 W/m2 would lead to faster development of this conversion technology.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExergy Analysis-Potential of Salinity Gradient Energy Source
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue7
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4038964
dc.journal.fristpage72001
dc.journal.lastpage072001-6
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record