Show simple item record

dc.contributor.authorBreault, Ronald W.
dc.contributor.authorShadle, Lawrence J.
dc.date.accessioned2019-02-28T11:14:37Z
dc.date.available2019-02-28T11:14:37Z
dc.date.copyright3/14/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_06_062202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254216
dc.description.abstractThis paper presents the design, development, and operation of a reactor system for CO2 capture. Modifications were implemented to address differences in sorbent from 180 μm Geldart group B to 115 μm Geldart group A material; operational issues were discovered during experimental trials. The major obstacle in system operation was the ability to maintain a constant circulation of a solid sorbent stemming from this change in sorbent material. The system consisted of four fluid beds, through which a polyamine impregnated sorbent was circulated and adsorption, preheat, regeneration, and cooling processes occurred. Pressure transducers, thermocouples, gas flow meters, and gas composition instrumentation were used to characterize thermal, hydrodynamic, and gas adsorption performance in this integrated unit. A series of shakedown tests were performed and the configuration altered to meet the needs of the sorbent performance and achieve desired target capture efficiencies. Methods were identified, tested, and applied to continuously monitor critical operating parameters including solids circulation rate, adsorbed and desorbed CO2, solids inventories, and pressures. The working capacity and CO2 capture efficiency were used to assess sorbent performance while CO2 closure was used to define data quality and approach to steady-state. Testing demonstrated >90% capture efficiencies and identified the regenerator to be the process step limiting throughput. Sorbent performance was found to be related to the reactant stoichiometry. A stochastic model with an exponential dependence on the relative CO2/amine concentration was used to describe 90% of the variance in the data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign, Development, and Operation of an Integrated Fluidized Carbon Capture Unit Using Polyethylenimine Sorbents
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue6
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4039317
dc.journal.fristpage62202
dc.journal.lastpage062202-7
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record