Show simple item record

dc.contributor.authorRogne, Robert. H.
dc.contributor.authorBryne, Torleiv. H.
dc.contributor.authorFossen, Thor. I.
dc.contributor.authorJohansen, Tor. A.
dc.date.accessioned2019-02-28T11:13:29Z
dc.date.available2019-02-28T11:13:29Z
dc.date.copyright1/9/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_07_071001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254021
dc.description.abstractWe present two alternative methods for fault detection and isolation (FDI) with redundant Microelectromechanical system (MEMS) inertial measurement units (IMUs) in inertial navigation systems (INS) based on nonlinear observers (NLOs). The first alternative is based on the parity space method, while the second is expanded with quaternion-based averaging and FDI. Both alternatives are implemented and validated using data gathered in a full-scale experiment on an offshore vessel. Data from three identical MEMS IMUs and the vessel's own industrial sensors are used to verify the methods' FDI capabilities. The results reveal that when it comes to FDI of the IMUs' angular rate sensors, there are differences between the two methods. The navigation algorithm based on quaternion weighting is essentially unaffected by the failure of an angular rate sensor, while the parity-space-method-based alternative experiences a perturbation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRedundant MEMS-Based Inertial Navigation Using Nonlinear Observers
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue7
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4038647
dc.journal.fristpage71001
dc.journal.lastpage071001-7
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record