Show simple item record

dc.contributor.authorNam, Youngsun
dc.contributor.authorKim, Jaehyun
dc.contributor.authorBahk, Cheongyo
dc.contributor.authorJang, Inyoung
dc.contributor.authorHo Song, Han
dc.contributor.authorLee, Dongjun
dc.date.accessioned2019-02-28T11:13:21Z
dc.date.available2019-02-28T11:13:21Z
dc.date.copyright3/19/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_06_061015.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253995
dc.description.abstractWe propose a novel modeling, estimation, and control framework for homogeneous charge compression ignition (HCCI) engines, which, by utilizing direct in-cylinder pressure sensing, can detect, and react to, the wide spectrum of combustion, thereby allowing for the prevention or even recovery from partial burn or misfire, while significantly improving the stability of transition control. For this, we first develop a discrete-time cyclic control-oriented model of the HCCI process, for which we completely replace the Arrhenius integral by quantities based on the in-cylinder pressure sensing. We then propose a nonlinear state feedback control based on the exact feedback linearization and the switching linear quadratic regulators (LQRs), and also present how the state and other quantities necessary for this control can be estimated by using the in-cylinder pressure sensing. We also provide a new modeling approach for heat transfer, which, through principal component analysis (PCA), can systematically allow us to choose most significant variables, thereby substantially improving control and estimation precision. Simulation studies using a continuous-time detailed HCCI engine model built on matlab/simulink and Cantera Toolbox are also performed to demonstrate the efficacy of our proposed framework for the scenarios of engine load transition and partial burn recovery with the enlarged regions-of-attraction with less stringent actuation limitation also shown.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling, Estimation, and Control of HCCI Engine With In-Cylinder Pressure Sensing
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4039210
dc.journal.fristpage61015
dc.journal.lastpage061015-12
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record