Show simple item record

dc.contributor.authorMin, Kyunghan
dc.contributor.authorShin, Jaewook
dc.contributor.authorJung, Donghyuk
dc.contributor.authorHan, Manbae
dc.contributor.authorSunwoo, Myoungho
dc.date.accessioned2019-02-28T11:13:16Z
dc.date.available2019-02-28T11:13:16Z
dc.date.copyright9/8/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_01_011013.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253986
dc.description.abstractAn accurate estimation of the intake oxygen concentration (IOC) is a prerequisite to develop the optimal control strategy because it directly affects the combustion and emissions. Since the IOC is determined based on the mass conservation law in the intake manifold, estimating the mass flow rate of the exhaust gas recirculation (EGR) is most critical. However, to estimate the EGR mass flow rate, the conventional orifice valve model causes extrapolation error or inaccurate estimation results under transient operating conditions. In order to improve the estimation performance, this study proposes a correction algorithm for estimating IOC. A dynamic correction state is determined for the orifice valve model. In addition, the intake pressure dynamics is also derived based on the energy conservation law in the intake manifold. Using these dynamic models, a nonlinear parameter varying model is determined, and an extended Kalman filter (EKF) is applied to derive the value of correction state. Furthermore, unmeasurable physical states of the nonlinear parameter varying model are estimated from an air system model that only requires the engine-equipped sensors of mass production engines. The correction algorithm is validated through the engine experiments that clearly demonstrate high accuracy of the IOC estimation during transient conditions, which may apply for the vehicle application.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEstimation of Intake Oxygen Concentration Using a Dynamic Correction State With Extended Kalman Filter for Light-Duty Diesel Engines
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4037390
dc.journal.fristpage11013
dc.journal.lastpage011013-15
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record