Show simple item record

dc.contributor.authorKoktavy, Shaun E.
dc.contributor.authorYudell, Alexander C.
dc.contributor.authorVan de Ven, James D.
dc.date.accessioned2019-02-28T11:13:07Z
dc.date.available2019-02-28T11:13:07Z
dc.date.copyright12/22/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_06_061008.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253954
dc.description.abstractA challenge in realizing switch-mode hydraulic circuits is the need for a high-speed valve with fast transition time and high switching frequency. The work presented includes the design and modeling of a suitable valve and experimental demonstration of the prototype in a hydraulic boost converter. The design consists of two spools driven by crank-sliders, designed for 120 Hz maximum switching frequency at a flow rate of 22.7 lpm. The fully open throttling loss is designed for <2% of the rated pressure of 34.5 MPa. The transition time is less than 5% (0.42 ms at 120 Hz) of the total cycle and the duty cycle is adjustable from 0 to 1. Leakage and viscous friction losses in the design are less than 2% of the rated hydraulic energy per cycle. The experimental results agreed well with the model resulting in a 3% variation in transition time. The use of the high-speed valve in a pressure boosts converter demonstrated boost ratio capabilities of 1.08–2.06.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign of a Crank-Slider Spool Valve for Switch-Mode Circuits With Experimental Validation
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4038537
dc.journal.fristpage61008
dc.journal.lastpage061008-9
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record