Show simple item record

dc.contributor.authorDeodhar, Nihar
dc.contributor.authorDeese, Joseph
dc.contributor.authorVermillion, Christopher
dc.date.accessioned2019-02-28T11:12:54Z
dc.date.available2019-02-28T11:12:54Z
dc.date.copyright8/29/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_01_011004.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253912
dc.description.abstractThis research presents an iterative framework for optimizing the plant and controller for complex systems by fusing expensive but valuable experiments with cheap yet less accurate simulations. At each iteration, G-optimal design is used to generate experiments and simulations within a prescribed design space that is shrunken in size after each successful iteration. The shrinking of the design space is determined through statistical characterization of a response surface model, and further shrinking is achieved at successive iterations through a numerical model correction factor that is driven by the results of experiments. An initial validation of this iterative design optimization framework was performed on an airborne wind energy (AWE) system, where tethers and an aerostat are used in place of a tower to elevate the turbine to high altitudes. Using a unique lab-scale setup for the experiments, the aforementioned iterative methodology was used to optimize the center of mass location and pitch angle set point for the airborne wind energy system. The optimum configuration yielded a substantial improvement in system responses as compared to a numerically optimized configuration. The framework was recently extended to include four variables (horizontal and vertical stabilizer areas, center of mass location, and pitch angle set point).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimentally Infused Plant and Controller Optimization Using Iterative Design of Experiments—Theoretical Framework and Airborne Wind Energy Case Study
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4037014
dc.journal.fristpage11004
dc.journal.lastpage011004-10
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record