Show simple item record

dc.contributor.authorChen, Kun-Yung
dc.date.accessioned2019-02-28T11:12:49Z
dc.date.available2019-02-28T11:12:49Z
dc.date.copyright12/19/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_05_051012.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253896
dc.description.abstractA model following adaptive sliding mode tracking control (MFASMTC) with the adjustable control gain based on a disturbance observer (DOB) for the mechanical system is proposed in this paper. The control gains of the proposed controller are automatically adjusted to compensate the unknown time-varying disturbances by the DOB. First, the unknown variables and uncertainties are lumped as the disturbance terms and the system dynamic model consist of the nominal matrix and disturbances vector. The desired model and sliding mode controller (SMC) are integrated by using the Lyapunov function candidate to obtain the general model following sliding mode tracking control (MFSMTC) with the fixed control gain. To stabilize and compensate the unknown time-varying disturbances for the control system, a DOB is combined with the MFSMTC to obtain the MFASMTC to automatically adjust the control gains. The mass-spring-damper system and two-link manipulator robot system are both used as examples system to demonstrate the proposed control scheme, respectively. The comparisons between MFSMTC with the fixed control gain and MFASMTC with the adjustable control gain based on a DOB are performed in this paper. From the simulation results, the proposed MFASMTC with the adjustable control gain based on a DOB demonstrates the stable and robust control performance for the unknown uncertainties and external disturbances. The proposed control method also can be applied to the other mechanical systems with the desired model to find the desired model following adaptive sliding mode tracking control.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Following Adaptive Sliding Mode Tracking Control Based on a Disturbance Observer for the Mechanical Systems
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue5
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4038165
dc.journal.fristpage51012
dc.journal.lastpage051012-15
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record