Show simple item record

dc.contributor.authorBi, Qingzhen
dc.contributor.authorWang, Xinzhi
dc.contributor.authorChen, Hua
dc.contributor.authorZhu, Limin
dc.contributor.authorDing, Han
dc.date.accessioned2019-02-28T11:12:47Z
dc.date.available2019-02-28T11:12:47Z
dc.date.copyright3/7/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-0434
dc.identifier.otherds_140_08_084501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253890
dc.description.abstractA transient milling stability analysis method is presented based on linear dynamics. Milling stability is usually analyzed based on asymptotic stability methods, such as the Floquet theory and the Nyquist stability criterion. These theories define stability that can return to equilibrium in an infinite time horizon under any initial condition. However, as a matter of fact, most dynamic processes in milling operations occur on a finite time scale. The transient vibration can be caused by some disturbance in practical milling process. Heavy transient vibrations were observed in existing works, though the machining parameters were selected in the stability zone determined by the asymptotic stability method. The strong transient vibrations will severely decrease the machining surface quality, especially for small workpieces in which the majority of machining process is executed in a short period of time. The analysis method of the transient milling stability is seldom studied, and only some experiments and conjectures can be found. Here the transient milling stability is defined as transient energy growth in a finite time horizon, and the prediction method of transient stability is proposed based on linear dynamics. The eigenvalues and non-normal eigenvectors of the Floquet transition matrix are all used to predict the transient milling stability, while only eigenvalues are employed in the traditional asymptotic stability analysis method. The transient stability is finally analyzed by taking the maximum vibration energy growth and the maximum duration time of transient energy growth in a finite time for optimal selection of processing parameters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNon-Normal Dynamic Analysis for Predicting Transient Milling Stability
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue8
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4039033
dc.journal.fristpage84501
dc.journal.lastpage084501-7
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2018:;volume( 140 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record