| dc.description.abstract | With the growing structural complexity and growing demands on structural reliability, nonlinear parameters identification is an efficient approach to provide better understanding of dynamic behaviors of the nonlinear system and contribute significantly to improve system performance. However, the dynamic response at nonlinear location, which cannot always be measured by the sensor, is the basis for most of these identification algorithms, and the clearance nonlinearity, which always exists to degrade the dynamic performance of mechanical structures, is rarely identified in previous studies. In this paper, based on the thought of output feedback which the nonlinear force is viewed as the internal feedback force of the nonlinear system acting on the underlying linear model, a frequency-domain nonlinear response reconstruction method is proposed to reconstruct the dynamic response at the nonlinear location from the arbitrary location where the sensor can be installed. For the clearance nonlinear system, the force graph method which is based on the reconstructed displacement response and nonlinear force is presented to identify the clearance value. The feasibility of the reconstruction method and identification method is verified by simulation data from a cantilever beam model with clearance nonlinearity. A clearance test-bed, which is a continuum structure with adjustable clearance nonlinearity, is designed to verify the effectiveness of proposed methods. The experimental results show that the reconstruction method can precisely reconstruct the displacement response at the clearance location from measured responses at reference locations, and based on the reconstructed response, the force graph method can also precisely identify the clearance parameter. | |
