Corrosion Behaviour of Bare and NiCrAlY Coated Alloy 214 in Supercritical Water at 700 °C

Abstract

Concerns with greenhouse gas emissions and the uncertainty of long-term supply of fossil fuels have resulted in renewed interest in nuclear energy as an essential part of the energy mix for the future. Many countries worldwide including Canada, China, and EU are currently undertaking the design of generation IV supercritical water-cooled reactor (SCWR) with higher thermodynamic efficiency and considerable plant simplification. The identification of appropriate materials for in-core and out-of-core components to contain the supercritical water (SCW) coolant is one of the major challenges for the design of SCWR. This study is carried out to evaluate the oxidation/corrosion behaviors of bare alloy 214 and NiCrAlY coated 214 under SCW at a temperature of 700 °C/25 MPa for 1000 h. The results show that chromium and nickel based oxide forms on the bare surface after exposure in SCW for 1000 h. A dense and adhered oxide layer, consisting of Cr2O3 with spinel (Ni(Cr, Al)2O4), was observed on NiCrAlY surface after 1000 h in SCW.