| dc.description.abstract | Graphene possesses many outstanding properties, such as high strength and light weight, making it an ideal reinforcement for metal matrix composite (MMCs). Meanwhile, fabricating MMCs through laser-assisted additive manufacturing (LAAM) has attracted much attention in recent years due to the advantages of low waste, high precision, short production lead time, and high flexibility. In this study, graphene-reinforced aluminum alloy AlSi10 Mg is fabricated using selective laser melting (SLM), a typical LAAM technique. Composite powders are prepared using high-energy ball milling. Room temperature tensile tests are conducted to evaluate the mechanical properties. Scanning electron microscopy observations are conducted to investigate the microstructure and fracture surface of obtain composite. It is found that adding graphene nanoplatelets (GNPs) significantly increases porosity, which offsets the enhancement of tensile performance as a result of GNPs addition. Decoupling effort is then made to separate the potential beneficial effects from GNPs addition and the detrimental effect from porosity increase. For this purpose, the quantitative relationship between porosity and material strength is obtained. Taking into consideration the strength reduction caused by the increased porosity, the strengthening effect of GNPs turns out to be significant, which reaches 60.2 MPa. | |
