Show simple item record

dc.contributor.authorZhu, Zi-Qin
dc.contributor.authorLiu, Min-Jie
dc.contributor.authorHu, Nan
dc.contributor.authorHuang, Yuan-Kai
dc.contributor.authorFan, Li-Wu
dc.contributor.authorYu, Zi-Tao
dc.contributor.authorGe, Jian
dc.date.accessioned2019-02-28T11:01:53Z
dc.date.available2019-02-28T11:01:53Z
dc.date.copyright10/4/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_02_022301.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251905
dc.description.abstractThe classical problem of inward solidification heat transfer inside a spherical capsule, with an application to thermal energy storage (TES), was revisited in the presence of nano-enhanced phase change materials (NePCM). The model NePCM samples were prepared by dispersing graphite nanoplatelets (GNPs) into 1-tetradecanol (C14H30O) at loadings up to 3.0 wt %. The transient phase change, energy retrieval, and heat transfer rates during solidification of the various NePCM samples were measured quantitatively using a volume-shrinkage-based indirect method. The data reduction and analysis were carried out under single-component, homogeneous assumption of the NePCM samples without considering the microscale transport phenomena of GNPs. It was shown that the total solidification time becomes monotonously shorter with increasing the loading of GNPs, in accordance with the increased effective thermal conductivity. The maximum relative acceleration of solidification was found to be more than 50% for the most concentrated sample, which seems to be appreciable for practical applications. In addition to enhanced heat conduction, the possible effects due to the elimination of supercooling and viscosity growth were elucidated. The heat retrieval rate was also shown to be increased monotonously with raising the loading of GNPs, although the heat storage capacity is sacrificed. Despite the remarkable acceleration of the solidification time, the use of a high loading (e.g., 3.0 wt %) was demonstrated to be possibly uneconomical because of the marginal gain in heat retrieval rate. Finally, correlations for the transient variations of the melt fraction and surface-averaged Nusselt number were proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInward Solidification Heat Transfer of Nano-Enhanced Phase Change Materials in a Spherical Capsule: An Experimental Study
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4037776
dc.journal.fristpage22301
dc.journal.lastpage022301-9
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record