Show simple item record

dc.contributor.authorYoder, , Jr., Graydon L.
dc.contributor.authorHeatherly, Dennis
dc.contributor.authorCaja, Mario
dc.date.accessioned2019-02-28T11:01:45Z
dc.date.available2019-02-28T11:01:45Z
dc.date.copyright12/12/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_04_042501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251885
dc.description.abstractA liquid fluoride salt experiment has been constructed and used to acquire natural convection heat transfer data. The experiment used FLiNaK salt in a small cell that included a cylindrical electrical heater, 1.27 cm in diameter, oriented vertically in a FLiNaK bath. Thermocouples internal to the heater were used, along with FLiNaK temperature measurements and heater power measurements, to determine natural circulation heat transfer coefficients. These data were acquired for Rayleigh numbers ranging from 3 × 105 to 8 × 109 and salt temperatures from 560 °C to 640 °C. Test results show that measured heat transfer coefficients are consistent with conventional natural convection heat transfer coefficients for cylinders, but the average error can be as high as 20% using these correlations. Correlations developed by fitting the data for this experiment show much lower errors (<10%).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNatural Convection Heat Transfer Experiments in Fluoride Salt
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4038132
dc.journal.fristpage42501
dc.journal.lastpage042501-9
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record