Show simple item record

dc.contributor.authorYao, Qi
dc.contributor.authorSupowit, Jacob
dc.contributor.authorCatton, Ivan
dc.date.accessioned2019-02-28T11:01:44Z
dc.date.available2019-02-28T11:01:44Z
dc.date.copyright12/19/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_04_042901.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251883
dc.description.abstractA novel inorganic aqueous solution (IAS) is shown to have a better heat transfer performance than water when used as the working fluid in copper-made phase-change heat transfer devices. First, the physical properties of IAS are measured and compared to those of water. Another, a chemical analysis is performed, and the chemical reactions involved between IAS and the copper surface are listed and categorized by their contributions to the heat transfer performance. In addition, a capillary rise test is performed to show how each chemical contributes to the improvement of the surface wettability. Last, using IAS in copper-made phase-change heat transfer devices is discussed, and the main focus is how IAS improves the heat transfer performance by a smaller thermal resistance and a larger critical heat flux. The conclusion is validated by thermo-siphon tests at different inclination angles.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of the Use of an Inorganic Aqueous Solution in Copper-Made Phase-Change Heat Transfer Devices
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4038190
dc.journal.fristpage42901
dc.journal.lastpage042901-9
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record