Show simple item record

dc.contributor.authorWang, D.
dc.contributor.authorEwing, D.
dc.contributor.authorChing, C. Y.
dc.date.accessioned2019-02-28T11:01:37Z
dc.date.available2019-02-28T11:01:37Z
dc.date.copyright3/30/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_07_073001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251862
dc.description.abstractExperiments were performed to investigate the local development of roughness and its effect on mass transfer in an S-shaped bend at Reynolds number of 200,000. The tests were performed over four consecutive time periods using a 203-mm-diameter test section with a dissolving gypsum lining to water in a closed flow loop at a Schmidt number of 1200. The surface roughness and the mass transfer over the test periods were measured using X-ray computed tomography (CT) scans of the surface. Two regions of high mass transfer are found: along the intrados of the first and second bends. The surface roughness in these two regions, characterized by the height-to-spacing ratio, grows more rapidly than in the upstream pipe. There is an increase in the mass transfer with time, which corresponds well with the local increase in the height-to-spacing ratio of the roughness. The two regions of high mass transfer enhancement in the bend can be attributed to both a roughness effect and a flow effect due to the bend geometry. The geometry effect was determined by normalizing the local mass transfer with that in a straight pipe with equivalent surface roughness. The mass transfer enhancement due to the geometry effect was found to be relatively constant for the two high mass transfer regions, with a value of approximately 1.5.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Surface Roughness and Bend Geometry on Mass Transfer in an S-Shaped Back to Back Bend at Reynolds Number of 200,000
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4038844
dc.journal.fristpage73001
dc.journal.lastpage073001-8
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record