Show simple item record

dc.contributor.authorSelimefendigil, Fatih
dc.contributor.authorÖztop, Hakan F.
dc.date.accessioned2019-02-28T11:01:29Z
dc.date.available2019-02-28T11:01:29Z
dc.date.copyright1/10/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_04_042205.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251837
dc.description.abstractNumerical study of nanofluid jet impingement cooling of a partially elastic isothermal hot surface was conducted with finite element method. The impingement surface was made partially elastic, and the effects of Reynolds number (between 25 and 200), solid particle volume fraction (between 0.01 and 0.04), elastic modulus of isothermal hot surface (between 104 and 106), size of the flexible part (between 7.5 w and 25 w), and nanoparticle type (spherical, cylindrical, blade) on the fluid flow and heat transfer characteristics were analyzed. It was observed that average Nusselt number enhances for higher Reynolds number, higher values of elastic modulus of flexible wall, smaller size of elastic part, and higher nanoparticle solid volume fraction and for cylindrical shaped particles. It is possible to change the maximum Nusselt number by 50.58% and 33% by changing the elastic modulus of the hot wall and size of elastic part whereas average Nusselt number changes by only 9.33% and 6.21%. The discrepancy between various particle shapes is higher for higher particle volume fraction.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCooling of a Partially Elastic Isothermal Surface by Nanofluids Jet Impingement
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4038422
dc.journal.fristpage42205
dc.journal.lastpage042205-7
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record