Show simple item record

dc.contributor.authorEiamsa-Ard, S.
dc.contributor.authorSamravysin, P.
dc.date.accessioned2019-02-28T11:00:39Z
dc.date.available2019-02-28T11:00:39Z
dc.date.copyright7/23/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0022-1481
dc.identifier.otherht_140_11_114501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251693
dc.description.abstractThis paper deals with the influence of overlapped-quadruple twisted tape (OQT) and typical quadruple twisted tape (QT) on the enhancing heat transfer rate in a heat exchanger tube. The effects of tube orientation (co-tapes and counter tapes), tape arrangement (cross and parallel arrangements), and overlapped twist ratio (yo/y = 0.625, 0.75, and 0.875) were investigated. The experiments were performed in the turbulent flow regime (5000 ≤ Re ≤ 20,000) under uniform wall heat flux boundary condition, using air as the testing fluid. The experimental results indicates that all OQTs consistently yield higher Nusselt number and thermal performance than QTs. The tapes in cross arrangement show better heat transfer enhancement and thermal performance than the ones in parallel arrangement. Heat transfer, friction loss, and thermal performance increase with decreasing overlapped twist ratio. The maximum thermal enhancement factor (TEF) of 1.58 is achieved by the use of overlapped-quadruple counter tapes in cross arrangement (CC-OQTs) with yo/y = 0.625 at the lowest Reynolds number of 5000.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization of Heat Transfer by Overlapped-Quadruple Counter Tapes
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4040785
dc.journal.fristpage114501
dc.journal.lastpage114501-6
dc.treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record