• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    A Computational Investigation of Fuel Chemical and Physical Properties Effects on Gasoline Compression Ignition in a Heavy-Duty Diesel Engine

    Thumbnail
    View/Open
    jert_140_10_102202.pdf (4.153Mb)
    Date
    2018
    Author
    Zhang, Yu
    Voice, Alexander
    Pei, Yuanjiang
    Traver, Michael
    Cleary, David
    Metadata
    Show full item record
    Abstract
    Gasoline compression ignition (GCI) offers the potential to reduce criteria pollutants while achieving high fuel efficiency. This study aims to investigate the fuel chemical and physical properties effects on GCI operation in a heavy-duty diesel engine through closed-cycle, three-dimensional (3D) computational fluid dynamic (CFD) combustion simulations, investigating both mixing-controlled combustion (MCC) at 18.9 compression ratio (CR) and partially premixed combustion (PPC) at 17.3 CR. For this work, fuel chemical properties were studied in terms of the primary reference fuel (PRF) number (0–91) and the octane sensitivity (0–6) while using a fixed fuel physical surrogate. For the fuel physical properties effects investigation, six physical properties were individually perturbed, varying from the gasoline to the diesel range. Combustion simulations were carried out at 1375 RPM and 10 bar brake specific mean pressure (BMEP). Reducing fuel reactivity was found to influence ignition delay time (IDT) more significantly for PPC than for MCC. 0D IDT calculations suggested that the fuel reactivity impact on IDT diminished with an increase in temperature. Moreover, higher reactivity gasolines exhibited stronger negative coefficient (NTC) behavior and their IDTs showed less sensitivity to temperature change. In addition, increasing octane sensitivity was observed to result in higher fuel reactivity and shorter IDT. Under both MCC and PPC, all six physical properties showed little impact on global combustion behavior, NOx, and fuel efficiency. Among the physical properties investigated, only density showed a notable effect on soot emissions. Increasing density led to higher soot due to deteriorated air entrainment into the spray and the slower fuel-air mixing process.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4251023
    Collections
    • Journal of Energy Resources Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV