Show simple item record

dc.contributor.authorZhang, Feng
dc.contributor.authorYang, Daoyong
dc.date.accessioned2019-02-28T10:56:32Z
dc.date.available2019-02-28T10:56:32Z
dc.date.copyright9/28/2017 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_03_032903.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251014
dc.description.abstractA novel slab source function has been formulated and successfully applied to examine effects of non-Darcy flow and penetrating ratio on performance of a horizontal well with multiple fractures in a tight formation. The Barree–Conway model is incorporated in the mathematical model to analyze non-Darcy flow behavior in the hydraulic fractures, while the pressure response under non-Darcy flow is determined by two dimensionless numbers (i.e., relative minimum permeability (kmr) and non-Darcy number (FND)). A semi-analytical method is then applied to solve the newly formulated mathematical model by discretizing the fracture into small segments. The newly developed function has been validated with numerical solution obtained from a reservoir simulator. Non-Darcy effect becomes more evident at a smaller relative minimum permeability (kmr < 0.05) and a larger non-Darcy number (FND > 10). The non-Darcy number is found to be more sensitive than the relative minimum permeability, resulting in a larger pressure drop even at a larger kmr. In addition, the non-Darcy flow is found to impose a significant impact on the early-stage bilinear/linear flow regime, resulting in an additional pressure drop that is similar to lowering the fracture conductivity. The pressure response can be classified into two categories by a penetrating ratio of 0.5. When the penetrating ratio is decreased, the early bilinear/linear flow regime occurs, followed by an early radial flow regime.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Non-Darcy Flow and Penetrating Ratio on Performance of Horizontal Wells With Multiple Fractures in a Tight Formation
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4037903
dc.journal.fristpage32903
dc.journal.lastpage032903-11
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record