Show simple item record

dc.contributor.authorWang, Ying
dc.contributor.authorLiu, Zhensheng
dc.date.accessioned2019-02-28T10:56:22Z
dc.date.available2019-02-28T10:56:22Z
dc.date.copyright4/16/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_08_082207.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250992
dc.description.abstractThe low vapor pressure of ethanol and the high latent heat of vaporization at low temperatures cause the difficulties of cold start in a flex fuel vehicle when it is fueled with pure ethanol. Preheating fuel is one of the effective methods to solve the above cold start problem. Thus, it is crucial to obtain the fuel temperature distribution in the heating system for fuel preheating process. For this purpose, the numerical analysis is adopted here to simulate the fuel preheating process at a cold start phase and explore the change of the fuel temperature field under different influence factors. The results indicate that the starting temperature has obvious impact on the temperature field distribution in the heating chamber and preheating time but has little effect on the volume of cold fuel in the connecting line at the end of heating. When the starting temperature is −5 °C, the preheating time is 8.3 s. When the starting temperature increases up to 15 °C, the preheating time will decrease as 4.9 s. Furthermore, the lower the starting temperature is, the higher the overall temperature of the heating chamber is. The installing angle of injectors has some influence on the temperature field distribution, and the cold fuel ratio reduces slightly when the angle increases from 30 deg to 60 deg. The calculation results indicate that the temperature of fuel at the injector inlet is above 20 °C, and the fuel injected during the first three cycles of the engine operation is hot fuel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Study on Fuel Preheating at Cold Start Phase in an Ethanol Flex Fuel Engine
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue8
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4039740
dc.journal.fristpage82207
dc.journal.lastpage082207-8
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record