Show simple item record

dc.contributor.authorvan der Watt, Johannes George
dc.contributor.authorLaudal, Daniel
dc.contributor.authorKrishnamoorthy, Gautham
dc.contributor.authorFeilen, Harry
dc.contributor.authorMann, Michael
dc.contributor.authorShallbetter, Ryder
dc.contributor.authorNelson, Teagan
dc.contributor.authorSrinivasachar, Srivats
dc.date.accessioned2019-02-28T10:56:19Z
dc.date.available2019-02-28T10:56:19Z
dc.date.copyright6/12/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_11_112002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250983
dc.description.abstractWe have investigated a novel gas/solid contacting configuration for chemical looping combustion (CLC) with potential operating benefits. CLC configurations are typically able to achieve high fuel conversion efficiencies at the expense of high operating costs and low system reliability. The spouted fluid bed (SB) was identified as an improved reactor configuration for CLC, since it typically exhibits high heat transfer rates and offers the ability to use lower gas flows for material movement compared to bubbling beds (BB). Multiphase Flow with Interphase eXchanges (MFIX) software was used to establish a spouted fluid bed reactor design. An experimental setup was built to supplement the model. The experimental setup was also modified for testing under high temperature, reacting conditions (1073–1273 K). The setup was operated in either a spouted fluid bed or a bubbling bed regime to compare the performance attributes of each. Results for the reactor configurations are presented for CLC using a mixture of carbon monoxide and hydrogen as fuel. Compared to the bubbling bed, the spouted fluid bed reactor achieved an equivalent or better fuel conversion at a lower pressure drop over the material bed. The spouted fluid bed design represents a viable configuration to improve gas/solid contacting for efficient fuel conversion, lower energy requirements for material movement and increase operational robustness for CLC. The research laid the groundwork for future research into a multi-phase reacting flow CLC system. The system will be developed from computational fluid dynamic modeling and pilot-scale testing to expedite the development of CLC technologies.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of a Spouted Bed Reactor for Chemical Looping Combustion
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue11
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4040403
dc.journal.fristpage112002
dc.journal.lastpage112002-8
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record