Show simple item record

dc.contributor.authorRowan, Steven L.
dc.contributor.authorYang, Jingsi
dc.contributor.authorBobek, Michael C.
dc.contributor.authorBreault, Ronald W.
dc.date.accessioned2019-02-28T10:56:08Z
dc.date.available2019-02-28T10:56:08Z
dc.date.copyright4/13/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_06_062004.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250951
dc.description.abstractA study was conducted to explore the effects of static bed height, nozzle diameter, cone angle, and particle properties on the minimum spouting velocity in a 4 in × 1 in rectangular spouted bed. Tests were conducted with various solids materials (including 871 μm HPDE pellets, 3.2 mm nylon beads, 707 μm glass beads, and 1.5 mm alumina spheres), two gas inlet nozzle diameters, and two cone angles. Experimentally obtained minimum spouting velocities were compared to existing published correlations developed for cylindrical spouted beds. In each case, it was determined that the existing correlations did not adequately predict the minimum spouting velocity for a rectangular spouted bed. A new correlation is proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEstimation of Minimum Spouting Velocity in a Rectangular Spouted Bed
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue6
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4039739
dc.journal.fristpage62004
dc.journal.lastpage062004-5
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record