Show simple item record

dc.contributor.authorRastogi, Pallavi
dc.contributor.authorMahulikar, Shripad P.
dc.date.accessioned2019-02-28T10:56:06Z
dc.date.available2019-02-28T10:56:06Z
dc.date.copyright4/9/2018 12:00:00 AM
dc.date.issued2018
dc.identifier.issn0195-0738
dc.identifier.otherjert_140_08_082002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250944
dc.description.abstractIn this theoretical study, a fully developed laminar convective water flow in a circular tube is “convectively overloaded” toward the microscale, by decreasing the tube diameter below 1 mm. The entropy generation rate (S˙gen) is obtained (with and without the viscous dissipation term) for a given rate of heat removal using a fixed rate of coolant (water) flow. The uniform wall heat flux and mass flux in a tube increase toward the micro-scale, which is “thermal and flow overloading,” respectively. The variations of—S˙gen due to fluid friction, fluid conduction heat transfer, and their total (S˙gen,tot), toward the micro-scale, are analyzed. Since S˙gen,tot remains more or less the same toward the microscale, it is worth overloading a tube for miniaturization up to the laminar-flow limit.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEntropy Generation in Laminar Forced Convective Water Flow Due to Overloading Toward the Microscale
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue8
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4039608
dc.journal.fristpage82002
dc.journal.lastpage082002-8
dc.treeJournal of Energy Resources Technology:;2018:;volume 140:;issue 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record