Show simple item record

dc.contributor.authorWang Zhiliang;He Ailin;Shi Gaoyang;Mei Guoxiong
dc.date.accessioned2019-02-26T07:58:28Z
dc.date.available2019-02-26T07:58:28Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001094.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250621
dc.description.abstractTo investigate the acoustic emission (AE) characteristics and damage mechanical behaviors of Huashan granite, two groups of uniaxial compression tests were carried out: the first group of tests was performed on samples after thermal treatment without a cooling-off period (i.e., tested at real-time temperature; RT samples); and a second group of tests was performed on samples after the samples had cooled to room temperature (i.e., tested at post-temperature, PT samples). The experimental results showed that AE energy increased with the increase of treatment temperature, and it became quite large for temperatures over 5°C. The AE accumulative energy counts of the RT sample were higher than the PT sample. It was found in uniaxial compression tests of heat-treated granite that the mutation point in the ∑N/∑E curve could be taken as the indicator of the crack damage threshold (σcd). The peak strain (the strain at the peak of the stress–strain curve) of the RT sample was larger than the PT sample, implying that the ductility of the former was more obvious, while peak stress and elastic modulus were smaller. For treatment temperatures of 5°C and below, the damage of the sample increased exponentially with external load, whereas as the temperature increased to 7°C, the damage-time curve was hyperbolic without an obvious inflection point. The sample under uniaxial compression exhibited axial splitting failure at low temperatures, and the failure mode became more complicated as the temperature rose.
dc.publisherAmerican Society of Civil Engineers
dc.titleTemperature Effect on AE Energy Characteristics and Damage Mechanical Behaviors of Granite
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001094
dc.page4017163
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record