Show simple item record

dc.contributor.authorQian Yu;Lee Seung Jae;Tutumluer Erol;Hashash Youssef M. A.;Ghaboussi Jamshid
dc.date.accessioned2019-02-26T07:58:20Z
dc.date.available2019-02-26T07:58:20Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001074.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250608
dc.description.abstractBallast containing large aggregate particles with uniform gradation is an essential layer in a railway substructure to facilitate load distribution and drainage. Although it is constructed or maintained in accordance with specifications, ballast is characterized by inherent randomness, not only in particle properties, such as mineralogy, size, and shape, but also in particle arrangement. Because of this randomness, the initial configurations of ballast particle assemblies vary from place to place in the field as well as from specimen to specimen in the laboratory. This paper presents a study on the influence of the aggregate scale randomness, which is the initial particle arrangement, on the geomechanical behavior of ballast. A series of large-scale, laboratory, triaxial shear-strength and repeated-load permanent-deformation tests was performed at the University of Illinois at Urbana-Champaign for the study. Numerical simulations using the discrete-element method (DEM) were also performed to understand better the effect of different initial particle arrangement on the basis of the identical particle scale properties of shape and size distribution. The ballast aggregate particles were modeled as three-dimensional (3D) polyhedral elements according to the properties of particles used in the laboratory tests, and then, the same set of particles was used to simulate laboratory tests with different initial particle arrangements for each specimen. The results from both the laboratory experiments and numerical simulations confirm that the initial particle arrangement may significantly affect the strength and deformation behavior of ballast. Hence, multiple tests or simulations with different particle-packing arrangements are needed to study ballast mechanical behavior. However, a stable average response can be obtained with a minimum of three laboratory experiments or numerical simulations.
dc.publisherAmerican Society of Civil Engineers
dc.titleRole of Initial Particle Arrangement in Ballast Mechanical Behavior
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001074
dc.page4017158
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record