Show simple item record

dc.contributor.authorXu Z. H.;Wu J.;Li S. C.;Zhang B.;Huang X.
dc.date.accessioned2019-02-26T07:58:17Z
dc.date.available2019-02-26T07:58:17Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001071.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4250604
dc.description.abstractA semianalytical solution to determine the minimum safety thickness of the rock resisting water inrush from filling-type karst caves was investigated. Mechanical analyses of the filling materials in karst caves located in a top, bottom, and lateral position to the tunnel were carried out by referring to the principle of the slice method. The mechanical mechanism of rock resisting water inrush was analyzed by adopting the theory of elastic mechanics. The semiquantitative analytical method for calculating the minimum safety thickness of the rock for resisting water inrush was achieved according to the bending strength and shear strength of the rock. The safety-thickness-prediction models of rock for resisting water inrush were applied in practical projects of the Luzhuba tunnel. The accuracy and availability of the proposed method were proven by comparing with the rock stratum thickness–span ratio method. The minimum safety thickness affected by the depth-span ratio of the filling-type karst cave, shear strength indexes of the filling materials, and the depth of the tunnel was analyzed and discussed. The results show that the minimum safety thickness of the rock resisting water inrush (1) decreases .2 m for every 2-m increase in cave height and increases .1 m for every 2-m increase in cave span such that the influence of the karst cave height is greater than the karst cave span on the minimum safety thickness; (2) decreases gradually with an increase of effective soil cohesion and decreases .3 m for every 5° increase in effective internal friction angle of the soil; and (3) increases .18 m for every 1-m increase in tunnel depth.
dc.publisherAmerican Society of Civil Engineers
dc.titleSemianalytical Solution to Determine Minimum Safety Thickness of Rock Resisting Water Inrush from Filling-Type Karst Caves
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001071
dc.page4017152
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record