Show simple item record

dc.contributor.authorHarvey P. S.;Virgin L. N.
dc.date.accessioned2019-02-26T07:52:06Z
dc.date.available2019-02-26T07:52:06Z
dc.date.issued2018
dc.identifier.other%28ASCE%29EM.1943-7889.0001415.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249944
dc.description.abstractIt is well established that the lateral bending stiffness of thin panels is considerably enhanced by judicious use of ribs or stiffeners. This increase in stiffness is primarily due to a disproportionate increase in the second moment of area, and because relatively little mass is added, stiffened panels are especially appealing in an aerospace engineering context. In experiments it is relatively straightforward to measure bending deflections (especially in a cantilever configuration) and natural frequencies using laser vibrometry and associated signal-processing tools. This paper reports on a parametric study in which bending stiffness and natural frequencies are measured for a set of rectangular panels, conveniently manufactured using a three-dimensional (3D) printer. Both isogrid (stiffeners in a triangular configuration) and orthogrid (stiffeners in a rectangular configuration) structures were made and tested, with certain nondimensional parameters held constant (for example, total mass and length-to-width ratio) to facilitate easier comparison. The boundary condition considered was one edge clamped and the other edges free (simple cantilever) with a consistent plan area aspect ratio, and with the height and arrangement of stiffening ribs providing the major parametric variation.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Stiffener Geometry on the Response of Grid-Stiffened Panels
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)EM.1943-7889.0001415
dc.page6017021
dc.treeJournal of Engineering Mechanics:;2018:;Volume ( 144 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record