Show simple item record

dc.contributor.authorMasmoudi Radhouane;Abouzied Ahmed
dc.date.accessioned2019-02-26T07:48:10Z
dc.date.available2019-02-26T07:48:10Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002055.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249497
dc.description.abstractSixteen full-scale concrete-filled fiber-reinforced polymer (FRP) tube (CFFT) rectangular beams, 3,2 mm long and 35×46  mm2 cross section, with steel reinforcement at the tension side have been tested under a four-point bending load. Some CFFT beams were partially filled with concrete by providing inner hollow FRP tubes inside the section at the tension zone. Several test parameters were studied such as the tube thickness, fiber laminates, and section configurations. The experimental results indicate outstanding performance of the steel-reinforced CFFT rectangular beams in terms of strength and deformability compared to conventional reinforced concrete (RC) beams. The inner hollow FRP tubes inside the CFFT beams acted positively in reinforcing the section and confining the concrete in the compression zone. Theoretical analysis was developed based on the experimental results to verify the applicability of North American codes to predict the deflection of rectangular CFFT beams. Based on this study, new equations and assumptions were introduced to Branson’s equation to predict accurately the effective moment of inertia of steel-reinforced CFFT rectangular beams at the preyielding stage as well as the postyielding stage.
dc.publisherAmerican Society of Civil Engineers
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002055
dc.page4018067
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record