Show simple item record

dc.contributor.authorBradford Mark Andrew;Pi Yong-Lin;Liu Airong
dc.date.accessioned2019-02-26T07:47:46Z
dc.date.available2019-02-26T07:47:46Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002051.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249453
dc.description.abstractLittle research has been reported for the out-plane elastic-plastic buckling strength of high-strength steel (HSS) arches and no adequate code provisions are available for their strength design, despite HSS structures being increasingly used in engineering construction. This paper presents a study of out-plane elastic-plastic buckling strengths of HSS arches using a validated finite-element model. The out-plane elastic-plastic behavior of HSS arches is determined by considering the influences of pertinent characteristics of the steel, material inelasticity, large deformations, initial lateral bow and twist imperfections, and residual stresses. The high yield strength of the HSS is found to reduce the difference between the inelastic and elastic out-plane buckling loads of HSS arches. Design rules for the strength of HSS arches under uniform compression and under uniform bending are developed based on the results of the finite-element analysis. The influences of initial lateral bow and twist imperfections and residual stresses are also elucidated.
dc.publisherAmerican Society of Civil Engineers
dc.titleOut-Plane Elastic-Plastic Buckling Strength of High-Strength Steel Arches
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002051
dc.page4018053
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record