Show simple item record

dc.contributor.authorMa Jia-Lin;Chan Tak-Ming;Young Ben
dc.date.accessioned2019-02-26T07:47:34Z
dc.date.available2019-02-26T07:47:34Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002046.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249419
dc.description.abstractThis paper presents the numerical investigation of the compressive behavior of cold-formed high-strength steel (HSS) tubular stub columns. The nominal .2% proof stresses of the high-strength steel are 7, 9, and 1,1 MPa. Experimental investigations have been conducted, and the numerical methodology has been verified against the test results in a complementary study. Parametric studies on the cold-formed HSS tubular stub columns were performed using the verified models, and additional data were generated to evaluate the structural performance of such compression members. The experimental and numerical results were then compared with the predictions from the design guidelines for square hollow sections (SHS), rectangular hollow sections (RHS), and circular hollow sections (CHS). The current codified slenderness limits and design methods were examined. Modifications to the design methods for resistances of SHS, RHS, and CHS stub columns against cross-sectional yielding or local buckling are proposed in this paper.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign of Cold-Formed High-Strength Steel Tubular Stub Columns
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002046
dc.page4018063
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record