Show simple item record

dc.contributor.authorWei Xiaone;Bruneau Michel
dc.date.accessioned2019-02-26T07:47:12Z
dc.date.available2019-02-26T07:47:12Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002042.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249375
dc.description.abstractQuasi-static experiments were conducted to subject buckling restrained braces (BRBs) to a regime of relative end displacements demands to investigate if the BRBs’ end connections could be able to sustain the required displacement demands when installed in bidirectional ductile end diaphragm systems (EDS). The loading protocols included the bidirectional displacement histories to be applied to the specimens for the cyclic inelastic test and the uniaxial displacement histories for the low-cycle fatigue test caused by temperature changes. Two types of BRBs with flat end plates and unidirectional pinholes, namely BRB-1 and BRB-2, were designed and tested. Four specimens of each type of BRB were tested under combinations of different displacement protocols, and the resulting BRBs’ hysteretic behaviors were studied and compared. All the BRB specimens tested developed cumulative inelastic deformations of more than 2 times the BRB’s axial yield displacement. The specimens were able to sustain multiple years of severe temperature cycles in addition to meeting the seismic qualification test criterion. Ultimately, as expected, all BRBs failed in tension after extensive cycles of inelastic deformations. No undesirable end-plate failure or instability was observed. A recommended design procedure for the EDS with BRBs in both straight and skew bridges was developed based on these experimental results.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation of Buckling Restrained Braces for Bridge Bidirectional Ductile End Diaphragms
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002042
dc.page4018048
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record