Show simple item record

dc.contributor.authorSmith Brooks H.;Chatterjee Aritra;Arwade Sanjay R.;Moen Cristopher D.;Schafer Benjamin W.
dc.date.accessioned2019-02-26T07:45:58Z
dc.date.available2019-02-26T07:45:58Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002025.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249208
dc.description.abstractTypical cold-formed steel floor systems involve many repetitive joist members laid in parallel, yet the design specifications are based upon the reliability of individual members and fail to account for the potential benefits imparted by repetitive framing. A repetitive member factor, similar to that used in the United States National Design Specifications (NDS) for wood, could be used in cold-formed steel (CFS) design to recognize these benefits and allow for more economical and efficient design that does not compromise safety. This paper introduces and validates procedures based on Monte Carlo simulation for assessing the performance of repetitive floor systems under current code assumptions, and elastic and inelastic load redistribution mechanisms, and uses these procedures to examine two floor systems of varying complexity. Load redistribution is found to provide a benefit of at least 3% to the capacity of the floor system based on a target reliability index of 2.5 and therefore justifies applying a 1.25 factor to the design of joist capacity for the systems studied.
dc.publisherAmerican Society of Civil Engineers
dc.titleSystem Reliability Benefits of Repetitive Framing in Cold-Formed Steel Floor Systems
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002025
dc.page4018061
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record