Show simple item record

dc.contributor.authorTang Chong;Phoon Kok-Kwang
dc.date.accessioned2019-02-26T07:43:39Z
dc.date.available2019-02-26T07:43:39Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001312.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248961
dc.description.abstractThis paper uses finite-element formulation of the lower bound theorem to determine the bearing capacity of ring foundations on dense sand. The results are validated with the plasticity solutions, numerical analyses, laboratory small-scale model tests, and field plate loading tests available in the literature. The Bolton strength–dilatancy relation is then adopted to consider the dependency of the friction angle on the stress level. For solid circular footings, the present results agree well with centrifuge model tests. However, a considerable discrepancy exists between numerical analyses and centrifuge model tests for the ring foundation, particularly when the radii ratio exceeds .5. An alternative method is proposed, in which a resistance ratio of the ring foundation to the solid circular footing with the same size is applied to an approximate equation for the bearing capacity of the solid circular footing regarding the stress level effect. The proposed approach is verified with centrifuge model tests.
dc.publisherAmerican Society of Civil Engineers
dc.titlePrediction of Bearing Capacity of Ring Foundation on Dense Sand with Regard to Stress Level Effect
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue11
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001312
dc.page4018154
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record