Show simple item record

dc.contributor.authorVu Ngoc Son;Li Bing
dc.date.accessioned2019-02-26T07:43:29Z
dc.date.available2019-02-26T07:43:29Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0001994.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248942
dc.description.abstractThis paper presents an experimental study carried out on eight full-scale uncorroded and corroded reinforced concrete short columns subjected to the simulated seismic loading to investigate effects of corrosion on the seismic performance of short columns that failed in shear. The key variables are the corrosion level of reinforcement and the applied axial force ratio. The seismic behavior of test specimens was evaluated in terms of crack pattern, hysteretic response, shear strength, displacement ductility, drift capacity, and energy dissipation capacity. The experimental results highlighted that the corroded columns suffered a significant degradation of shear strength and deformation capacity as compared with uncorroded columns, especially when they are highly corroded and under high axial load ratio. Methods were proposed to estimate the shear strength of corroded short columns that failed in shear that consider the contribution reductions to the shear strength of transverse reinforcement and concrete due to corrosion. Among these methods, the shear strength of corroded RC short columns estimated based on both the average corrosion mass loss and average residual cross-sectional area was not conservative as compared with the test results. The shear strength of corroded short columns estimated using the minimum residual cross-sectional area of transverse reinforcement, however, showed good and reliable agreement with the test results in this study.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Performance Assessment of Corroded Reinforced Concrete Short Columns
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001994
dc.page4018018
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record